BDNKM - V-114 VULCABOND
- MSDS: BDNKM
- Manufacturer: STANCHEM INC
- Product Name: V-114 VULCABOND
- National Stock Number: 8030-00-246-9925
Product Identification
Product ID:V-114 VULCABOND
MSDS Date:01/01/1985
FSC:8030
NIIN:00-246-9925
MSDS Number: BDNKM
Responsible Party
EAST BERLIN, CT 06023-9706
US
Emergency Phone: 203-828-0571
Info Phone: 203-828-0571
Cage: 78520
Contractor
Telephone: 203-828-0571
Cage: 78520
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 80%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL;9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PHENOL
CAS: 108-95-2
RTECS: SJ3325000
Fraction By Weight: <.05%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 5 PPM; 8990
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:LOCAL IRRITATION & NARCOSIS
First Aid
First Aid:REMOVE FROM EXPOSURE AREA. LOOSEN TIGHT CLOTHING. APPLY
ARTIFICIAL RESP IF UNCONSCIOUS.
Fire Fighting
Flash Point:28F, -2C OC
Lower Limits:1.8
Upper Limits:11.5
Extinguishing Media:FOAM, CO2 OR DRY CHEMICAL
Fire Fighting Procedures:TREAT AS FLAMMABLE LIQUID IN WET STATE.
Accidental Release
Spill Release Procedures:HANDLE AS A FLAMMABLE LIQUID.
Handling
Handling and Storage Precautions:DO NOT STORE NEAR OXIDIZING MAT'LS OR
HEATING EQUIPMENT
Other Precautions:STORE BELOW 90F
Exposure Controls
Respiratory Protection:EXTENDED EXP-RESPIRATOR W ACT. CHARCOAL FILTER
OR IND. AIR SUPPLY
Ventilation:LOCAL IN SMALL AREAS; MECHANICAL ON LGE SURFACE
APPLICATION.
Protective Gloves:POLYETHYLENE
Eye Protection:GLASSES/SIDE SHIELDS.
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:176F, 80C
Vapor Pres:71
Vapor Density:1.4
Spec Gravity:0.86
Evaporation Rate & Reference:4.6/ BUAC
Solubility in Water:MODERATE
Appearance and Odor:BLUE LIQUID W COMBINATION KETONE-PHENOLIC RESIN OD
Percent Volatiles by Volume:84
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MAT'LS
Disposal
Waste Disposal Methods:SOAK UP WET ADHESIVE ON AN ABSORBENT MAT'L,
PLACE IN CLOSED CONTAINER & DISPOSE W SOLID WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.